ONE M503 Magnetoscale LCD Digital Readout Meter for stCutting tool NEW

February 1, 2023 admin

ONE M503 Magnetoscale LCD Digital Readout Meter for stCutting tool NEW. 1.7 bit LCD display that it is more suitable for long travel equipment. High contrast backlight, clear and eye-catching. Low power consumption, no external power supply (built-in two nodes 5 battery). Repetition precision can be up to + 0.01mm. 5 initial value reset function (“clean zero”). Optional millimeter mm/ inches inch. Optional relative REL/ absolute ABS. Optional linear measurement / angle measurement. System precision: ±0.03+0.01L(m) mm. Resolution: 0.01, 0.05, 0.1, 1. Display range: -1999999 9999999. Consumption of current: Max. Power: two AA battery. Reading head and line length: default 1m. Reading head gap: Max. 2.5mm, recommending 1.5mm. Matching magnetic ruler: MS50. Waterproof grade: digital display IP40, reading head IP65. Ensure the parallelism of the installation table. Carefully clean up the installation table without oil, dust, iron and so on. The magnetic stripe gradually attached to the adhesive parallel installation table. The magnetic stripe strip parallel to the gum protection gradually attached to the surface of the magnetic stripe. Attention: not close to the strong magnetic, or damage the magnetic strip. Posted: will be posted on the magnetic stripe clean equipment installation, will protect the strip affixed to the surface in the black stripe, AB glue sealed at both ends of the magnetic stripe. Read the number head. The feeler (1.5mm) sandwiched between the magnetic stripe and the reading head, with M3 screws readheads will remove feeler. Observe the direction of measurement data. On the contrary, change the direction of the data through the P02. Determine the initial display value. The initial position value can be set and transferred through the P01. At the same time press the “C” + “F” key to adjust the set value of the P01 menu, that is, the initial value reset function (“clean zero”). LCD backlight key is pressed, the backlight automatically closes after 5 seconds if the measurement data is not changed, otherwise the backlight is often turned on until it is pressed again. When installing this product, if the deviation is too large, it will affect the use precision and even can not be used. Please do not corrode, acid, alkali, direct sunlight, etc. Which exceed the environment requirements, otherwise it may cause trouble. The bending radius of the reading head must be greater than 25mm. The installation of this equipment should be more than 0.5 meters above the circuit breaker, relay, electric motor capacitance, brake, clutch, frequency converter and so on. The cable direction must be separated from the power line to reduce the noise in the string. Thank you for your support. We are not responsible for undeliverable address. Dear friend, your happy is very important to me! . We stand behind every product we sell. You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here. We will be happy to assist you. We would try our best to serve you with any question / problem. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies”. The seller is “healthsale” and is located in this country: CN. This item can be shipped worldwide.

Model: M503
Brand: Unbranded/Generic
Axis: 1 Axis

1PCS M503 Magnetoscale LCD Digital Readout Meter for Woodwork stone Cutting tool

August 30, 2022 admin

Easy & Secure Payments. 1PCS M503 Magnetoscale LCD Digital Readout Meter for Woodwork stone Cutting tool. 1.7 bit LCD display that it is more suitable for long travel equipment 2. High contrast backlight, clear and eye-catching 3. Low power consumption, no external power supply (built-in two nodes 5 battery) 4. Repetition precision can be up to + 0.01mm 5 initial value reset function (“clean zero”) 6. Optional millimeter mm/ inches inch 7. Optional relative REL/ absolute ABS 8. Optional linear measurement / angle measurement. System precision: ±0.03+0.01L(m) mm Repetition precision: Max. ±0.01mm Resolution: 0.01, 0.05, 0.1, 1 Display range: -1999999 9999999 Consumption of current: Max. 500uA (backlight unopened) Power: two AA battery Operating temperature: 0? Mechanical properties: shape size: 1005230mm Open size: 9242mm Reading head and line length: default 1m Reading head gap: Max. 2.5mm, recommending 1.5mm Moving speed: Max. 5m/s Matching magnetic ruler: MS50 Waterproof grade: digital display IP40, reading head IP65 Weight: Max. Ensure the parallelism of the installation table 2. Carefully clean up the installation table without oil, dust, iron and so on 3. The magnetic stripe gradually attached to the adhesive parallel installation table 4. The magnetic stripe strip parallel to the gum protection gradually attached to the surface of the magnetic stripe 5. Attention: not close to the strong magnetic, or damage the magnetic strip. Posted: will be posted on the magnetic stripe clean equipment installation, will protect the strip affixed to the surface in the black stripe, AB glue sealed at both ends of the magnetic stripe. Read the number head. The feeler (1.5mm) sandwiched between the magnetic stripe and the reading head, with M3 screws readheads will remove feeler. Observe the direction of measurement data. On the contrary, change the direction of the data through the P02. Determine the initial display value. The initial position value can be set and transferred through the P01. At the same time press the “C” + “F” key to adjust the set value of the P01 menu, that is, the initial value reset function (“clean zero”). LCD backlight key is pressed, the backlight automatically closes after 5 seconds if the measurement data is not changed, otherwise the backlight is often turned on until it is pressed again. When installing this product, if the deviation is too large, it will affect the use precision and even can not be used. Please do not corrode, acid, alkali, direct sunlight, etc. Which exceed the environment requirements, otherwise it may cause trouble. The bending radius of the reading head must be greater than 25mm 6. The installation of this equipment should be more than 0.5 meters above the circuit breaker, relay, electric motor capacitance, brake, clutch, frequency converter and so on 7. The cable direction must be separated from the power line to reduce the noise in the string. Do write to us and give us an opportunity to address your concerns firstly. We are not responsible for undeliverable address. We will be happy to assist you. We would try our best to serve you with any question / problem. This item is in the category “Business, Office & Industrial\Industrial Tools\Measuring Tools\Other Measuring Tools”. The seller is “berthaline” and is located in this country: CN. This item can be shipped worldwide.

Model: M503
Axis: 1 Axis
Brand: Unbranded

ONE NEW M503 Magnetoscale LCD Digital Readout Meter for stCutting tool

August 20, 2022 admin

ONE NEW M503 Magnetoscale LCD Digital Readout Meter for stCutting tool. 1.7 bit LCD display that it is more suitable for long travel equipment. High contrast backlight, clear and eye-catching. Low power consumption, no external power supply (built-in two nodes 5 battery). Repetition precision can be up to + 0.01mm. 5 initial value reset function (“clean zero”). Optional millimeter mm/ inches inch. Optional relative REL/ absolute ABS. Optional linear measurement / angle measurement. System precision: ±0.03+0.01L(m) mm. Resolution: 0.01, 0.05, 0.1, 1. Display range: -1999999 9999999. Consumption of current: Max. Power: two AA battery. Reading head and line length: default 1m. Reading head gap: Max. 2.5mm, recommending 1.5mm. Matching magnetic ruler: MS50. Waterproof grade: digital display IP40, reading head IP65. Ensure the parallelism of the installation table. Carefully clean up the installation table without oil, dust, iron and so on. The magnetic stripe gradually attached to the adhesive parallel installation table. The magnetic stripe strip parallel to the gum protection gradually attached to the surface of the magnetic stripe. Attention: not close to the strong magnetic, or damage the magnetic strip. Posted: will be posted on the magnetic stripe clean equipment installation, will protect the strip affixed to the surface in the black stripe, AB glue sealed at both ends of the magnetic stripe. Read the number head. The feeler (1.5mm) sandwiched between the magnetic stripe and the reading head, with M3 screws readheads will remove feeler. Observe the direction of measurement data. On the contrary, change the direction of the data through the P02. Determine the initial display value. The initial position value can be set and transferred through the P01. At the same time press the “C” + “F” key to adjust the set value of the P01 menu, that is, the initial value reset function (“clean zero”). LCD backlight key is pressed, the backlight automatically closes after 5 seconds if the measurement data is not changed, otherwise the backlight is often turned on until it is pressed again. When installing this product, if the deviation is too large, it will affect the use precision and even can not be used. Please do not corrode, acid, alkali, direct sunlight, etc. Which exceed the environment requirements, otherwise it may cause trouble. The bending radius of the reading head must be greater than 25mm. The installation of this equipment should be more than 0.5 meters above the circuit breaker, relay, electric motor capacitance, brake, clutch, frequency converter and so on. The cable direction must be separated from the power line to reduce the noise in the string. Thank you for your support. We are not responsible for undeliverable address. Dear friend, your happy is very important to me! . We stand behind every product we sell. You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here. We will be happy to assist you. We would try our best to serve you with any question / problem. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies”. The seller is “supershopping88″ and is located in this country: CN. This item can be shipped worldwide.

Model: M503
Brand: Unbranded/Generic
Axis: 1 Axis

1PCS NEW M503 Magnetoscale LCD Digital Readout Meter for stCutting tool

August 17, 2022 admin

1PCS NEW M503 Magnetoscale LCD Digital Readout Meter for stCutting tool. 1.7 bit LCD display that it is more suitable for long travel equipment. High contrast backlight, clear and eye-catching. Low power consumption, no external power supply (built-in two nodes 5 battery). Repetition precision can be up to + 0.01mm. 5 initial value reset function (“clean zero”). Optional millimeter mm/ inches inch. Optional relative REL/ absolute ABS. Optional linear measurement / angle measurement. System precision: ±0.03+0.01L(m) mm. Resolution: 0.01, 0.05, 0.1, 1. Display range: -1999999 9999999. Consumption of current: Max. Power: two AA battery. Reading head and line length: default 1m. Reading head gap: Max. 2.5mm, recommending 1.5mm. Matching magnetic ruler: MS50. Waterproof grade: digital display IP40, reading head IP65. Ensure the parallelism of the installation table. Carefully clean up the installation table without oil, dust, iron and so on. The magnetic stripe gradually attached to the adhesive parallel installation table. The magnetic stripe strip parallel to the gum protection gradually attached to the surface of the magnetic stripe. Attention: not close to the strong magnetic, or damage the magnetic strip. Posted: will be posted on the magnetic stripe clean equipment installation, will protect the strip affixed to the surface in the black stripe, AB glue sealed at both ends of the magnetic stripe. Read the number head. The feeler (1.5mm) sandwiched between the magnetic stripe and the reading head, with M3 screws readheads will remove feeler. Observe the direction of measurement data. On the contrary, change the direction of the data through the P02. Determine the initial display value. The initial position value can be set and transferred through the P01. At the same time press the “C” + “F” key to adjust the set value of the P01 menu, that is, the initial value reset function (“clean zero”). LCD backlight key is pressed, the backlight automatically closes after 5 seconds if the measurement data is not changed, otherwise the backlight is often turned on until it is pressed again. When installing this product, if the deviation is too large, it will affect the use precision and even can not be used. Please do not corrode, acid, alkali, direct sunlight, etc. Which exceed the environment requirements, otherwise it may cause trouble. The bending radius of the reading head must be greater than 25mm. The installation of this equipment should be more than 0.5 meters above the circuit breaker, relay, electric motor capacitance, brake, clutch, frequency converter and so on. The cable direction must be separated from the power line to reduce the noise in the string. Thank you for your support. We stand behind every product we sell. However, we will try our best to minimize it. You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here. Easy & Secure Payments. This item is in the category “Business, Office & Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies”. The seller is “ndvp428411*” and is located in this country: CN. This item can be shipped worldwide.

Model: M503
Brand: Unbranded/Generic
Axis: 1 Axis

ONE M503 Magnetoscale LCD Digital Readout Meter for stCutting tool NEW

August 5, 2022 admin

Model: M503
Brand: Unbranded/Generic
Axis: 1 Axis

1PCS M503 Magnetoscale LCD Digital Readout Meter for Woodwork stone Cutting tool

May 27, 2022 admin

Model: M503
Axis: 1 Axis
Brand: Unbranded

2Axis Digital Readout DRO +2pc TTL Linear Scale Bridgeport Milling Position Tool

December 3, 2021 admin

Jewelry Design & Repair. Digital Readout& Linear Scale. Welding & Soldering Tools. Rosin Heat Press Machine. 2Axis Digital Readout DRO +2pc TTL Linear Scale Bridgeport Milling Position Tool. 2Axis Digtial Readout Kit DRO Display 5µm Linear Scale Sensor Mill Lathe. This kind of DRO is commonly fitted to machines, especially for metal working – lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools – to allow the operator to work faster and with greater accuracy. (1) Digital display to. (2) Advanced trigonometric calculation so to accomplish a perfect project. To offer excellent long-distance viewing. (4) Digital readout kit can avoid wasting weeks to check machine precision. (6) 1pc digital readout(2Axis/3Axis/4Axis/5Axis) with scales(upon your options). 5µm (0.005mm/0.0002). 1pc 2Axis Digital Readout. 2pc TTL Linear Scales. 1pc English User Manual. Q1 : are the length 100, 150, 200…. 1500mm travel length or total? Q2: if i need 200mm , 450mm scales with 2axis digital readout, how should i do? Answer : You can select the 200MM (8″), 450MM (18″), 2Axis Digital Readout add in your cart , then make. Q3 : what does the dro measure to? Do you have 1µm Scale? Q4 : if i need a scale like 255mm , can you offer it. Answer : 250mm is enough , its measuring range can reach up to 270mmso you can use 250mm if you. Need to measure 255mm. Q5Do you have travel length of 1550mm , 1600mm and 1900mm. Q6 : Can i cut the scales by myself? Answer : Technically NO, it maybe. Q7: Do you have English user manual? Answer : yes, it comes with the dro box. Q8: Do you have other higher precision type , such as measure to 0.001mm? Answer : Yes , 0.001mm (0.0001) is available. Q9: Is it easy to install these scales and dro? Answer : Please must check the scale pin definition (1,2,3,4,5,6,7,8,9), which is very important!! Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Like LCD screen, industrial burner accessories, printer accessories, instrument accessories, and other fields solutions, we supply Sumsung, LG, AUO, Xinje, Riello, Honeywell, Dungs, Mitsubishi, Siemens, Heidelberg machine parts and The international famous brand accessories etc. Due to time zones, our reply to your questions may not be immediately. But within above working time, we w. If it’s non-workdays, please kindly be patient and wait till Monday. The item “2Axis Digital Readout DRO +2pc TTL Linear Scale Bridgeport Milling Position Tool” is in sale since Tuesday, October 19, 2021. This item is in the category “Business & Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies”. The seller is “industry.factory” and is located in Shenzhen. This item can be shipped worldwide.

Brand: ToAuto
Type: Milling Machine Position Tool
Axis: 2Axis
MPN: Does Not Apply
Scale: Optical
Supply Voltage range :: AC 80V~260V; 50~60Hz
Power consumption:: 15VA
Model: 2 Axis DRO+Scales
Scale Length: 100-1000mm
Operating temperature: 0~45 degree centigrade
Storage temperature: -30~70 degree centigrade
Relative humidity: Less than 90%
Readout allowable input signal: TTL square wave
Resolution: 5µm
Min resolution of digital display angle: 0.0001/pulse
Cable length: 3M
Digital display dimension: 283*178*70mm (11.2″*7″*2.8″)
Linear Scale communicate: DB9(RS232)
Display language: English
Applications: For CNC Milling Grinding Lathe Machine

Z Axis Height Dial Tool Offset Setting Gauge CNC Mill DRO Digital Readout PRO

September 25, 2021 admin

Z Axis Height Dial Tool Offset Setting Gauge – CNC Mill DRO Digital Readout PRO. The Z axis tool setting gauge allows an accurate tool height to be set. We offer full UK support on all the products we sell. Same day despatch on all items ordered before 15:00 GMT. Block Dimensions – 50mm wide, 50mm deep and 47mm high. Maximum Overall Height: 50.5mm. Contact Area Diameter: 32mm. Contact Area Travel: 2.8mm. Included with the gauge – Wooden storage case. The Z axis tool setting gauge allows an accurate tool height to be set from the work piece or machine table. The gauge has a large contact area on the top face, for the tool. The tool height is then adjusted to bring the reading on the dial to zero, giving a precision tool height of 50mm. The gauge is constructed of hardened stainless and has a magnetic base allowing tool setting on all planes. The tool gauge is calibrated by an internal stop that is engaged by the calibration knob. An ideal accessory for digital readouts or CNC machine tools. Machine DRO are suppliers of Digital Readout Systems, Measuring Tools, Machine Tools. Established in the UK in 2003 and we pride ourselves on providing top quality tools and equipment with professional customer service and support to both professionals and hobbyists. The item “Z Axis Height Dial Tool Offset Setting Gauge CNC Mill DRO Digital Readout PRO” is in sale since Friday, June 8, 2018. This item is in the category “Business, Office & Industrial\Hand Tools\Measuring Tools\Other Measuring Tools”. The seller is “machine_dro” and is located in Hoddesdon. This item can be shipped worldwide.

Brand: Machine DRO
Modified Item: n/a
MPN: MT-ED-Z-DIAL
Type: Tool Setting Gauge

2Axis Digital Readout DRO Display Linear Scale Kit Milling Lathe Measure Tool

July 23, 2021 admin

Stepper Motor Drive System. Servo Motor Drive System. Gearbox & Speed Reducer. 2Axis Digital Readout DRO Display Linear Scale Kit Milling Lathe Measure Tool. Scale cover, screw bag. (1)Digital display to. And improve precision (2)Advanced. So to accomplish a perfect project (3). This DRO kit is. Commonly fitted to machines , especially for metal working – lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools – to allow the operator to work faster and with greater accuracy. Use of DROs is not limited to manually operated machines. CNC machines can usually be switched to manual operation, and in this case a form of DRO is simulated on its control panel. Supply Voltage range: AC 80V220V; 5060Hz. Operating temperatur: 045 degree centigrade. Storage temperatur: -3070 degree centigrade. Relative humidit: Less than 90%. Readout allowable input signal: TTL square wave. Allowable input signal frequency: Less than 5M Hz. Max resolution of digital display length. 5µm (0.005mm/0.0002). Min resolution of digital display angle : 0.0001/pulse. Dimensions: 28317870mm (11.2″7″2.8). Linear Scale communicate: DB9(RS232). Backup data for power fail: power off Memory by E2PROM for ten years. Lifetime: five million times. Please see the details above. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control. We will reply you ASAP. Feedback, so that we can satisfactorily solve your concerns. The item “2Axis Digital Readout DRO Display Linear Scale Kit Milling Lathe Measure Tool” is in sale since Thursday, February 4, 2021. This item is in the category “Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies”. The seller is “superstore.cnc” and is located in shenzhen,Guangdong. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: ToAuto
Model: DRO-2Axis
MPN: Does Not Apply
Voltage: +5V±5% 80mA
Speed: 100m/min
Application: Milling/ Grinding/Lathe Machines
Distance of travel(L0): 50~1000 mm available
Type: linear Sensor
Resolution: 5µm
Axis: 2-Axis

Mill_Lathe_Digital_Readout_5_m_Linear_Scale_TTL_Glass_Sensor_Measuring_Tool_EDM_01_jljk

Mill Lathe Digital Readout 5µm Linear Scale TTL Glass Sensor Measuring Tool EDM

April 2, 2021 admin

Stepper Motor Drive System. Servo Motor Drive System. Gearbox & Speed Reducer. Mill Lathe Digital Readout 5µm Linear Scale TTL Glass Sensor Measuring Tool EDM. Milling Machine Digital Readout 2/3/4/5Axis DRO Display Linear Glass Scale 5µm TTL Sensor for CNC Mill Lathe EDM Machine. This kind of DRO is commonly fitted to machines, especially for metal working – lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools – to allow the operator to work faster and with greater accuracy. Package Included : (according to your selection). 1pc digital readout only. 1pc linear glass scale (all length are travel length). 1pc English User Manual (come with DRO box). 2/3Axis Digital Readout DRO Display Specifications. Supply Voltage range : AC 80V260V; 5060Hz. US, AU, EU, UK Plug available. Operating temperature: 045 degree centigrade. Storage temperature: -3070 degree centigrade. Relative humidity: Less than 90%. Readout allowable input signal: TTL square wave. Allowable input signal frequebcy: Less than 5M Hz. Max resolution of digital display length. 5µm (0.005mm/0.0002). Min resolution of digital display angle :0.0001/pulse. Digital Readout Dimensions:29517065mm (11.6″6.7″2.56). Linear Scale Interface: DB9(RS232). Display Advantage: Having a good capacity of resisting disturbance, durable keyboard, easy to change. SDM 200 sets memory, power-off memory for 10years , circumference drilling, oblique line drilling, 1/2 centering. The simple R function. Chambering (applicable to: Milling machine, Boring machine). Tool conpensation (for lathe). Machining of oblique plane. Also a calculator is equipped for more convenient usage. (1) Digital display to. So to accomplish a perfect project. To offer excellent long-distance viewing. (4) Digital readout kit can avoid wasting weeks to check machine precision. (6) 1pc digital readout(2Axis/3Axis) with scales(upon your options). 5µm (0.0002) resolution. 4/5 Axis Digital Readout DRO Display Specifications. Clear 200 sets SDM datum. Ref datum memory function. 200 sets subdatum function. Machining function of the grinding machine. Machining function of lathe. Machining function of EDM. 4/5 Axis Digital Readout. Readout allowable input signal. Allowable input signal frequebcy. Less than 5M Hz. Min resolution of digital display angle. Having a good capacity of resisting disturbance, durable keyboard, easy to change. Q1 : are the length 100, 150, 200…. 1500mm travel length or total? Answer : all are travel length. Q3 : what does the dro measure to? Answer : measure to 0.005mm , 0.0002inch 1inch=25.4mm. Q4 : if i need a scale like 255mm , can you offer it? Answer : 250mm is enough , its measuring range can reach up to 270mmso you can use if you need to measure 255mm. Q5 : Can i cut the scales by myself? Technically NO, it maybe unavailable after cutting. Q6: Do you have English user manual? Answer : yes, it comes with the dro box. Q7: Do you have other higher precision type , such as measure to 0.001mm? Answer : Yes , 1micron / 0.001mm (0.0001) is available. Q8: Is it easy to install these scales and dro? Answer : Please must check the scale pin definition (1,2,3,4,5,6,7,8,9), which is very important!! Please see the details above. We are a leading provider for industrial automation control, CNC machine and electrical equipment. Each product, in which FastToBuy sales online, is subject to a 100% quality control. We will reply you ASAP. Feedback, so that we can satisfactorily solve your concerns. The item “Mill Lathe Digital Readout 5µm Linear Scale TTL Glass Sensor Measuring Tool EDM” is in sale since Friday, July 31, 2020. This item is in the category “Business & Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies”. The seller is “superstore.cnc” and is located in shenzhen,Guangdong. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: FASTTOBUY
MPN: Does Not Apply
Voltage: +5V±5% 80mA
Speed: 100m/min
Application: Milling/ Grinding/Lathe Machines
Distance of travel(L0): 50~1000 mm available
Type: linear Sensor
Resolution: 5µm
Bundle Listing: Yes

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30